Fiber Optic Cabling for Offices and Campuses
Multimode OM3 and OM4 and single-mode OS2 fiber, installed, terminated and tested for Phoenix-metro businesses — planned with the copper plant, not instead of it.
- OM3 · OM4 · OS2
- Commercial only
- Tested and labeled
OM3, OM4 and OS2, installed as part of the whole cable plant
Fiber is how we connect closets, floors and buildings when copper is the wrong distance or the wrong tool. We install multimode OM3 and OM4 and single-mode OS2, terminated in rack-mount enclosures, labeled and loss-tested. Horizontal cabling to desks, phones, cameras and access points is still copper — Cat6, Cat6A, Cat7, Cat7A and Cat 8, chosen for the job. The two belong in one design, not two separate contracts.
Multimode OM3 and OM4
Typical choice for in-building backbones between an MDF and IDF, or between nearby closets, when the distances fit multimode.
Single-mode OS2
The usual choice for longer campus or building-to-building runs, and for backbones you want to leave room to grow.
Termination, labeling and tests
Fiber landed in enclosures, labeled at both ends, and loss-tested, with documentation your IT team can actually use.
For a plain-English comparison of when fiber is worth it and when copper is enough, read fiber vs. copper in an office. The broader cable plant is covered on our structured cabling page.
Where fiber usually shows up on a C13 job
- MDF to IDF backbones in a multi-story or multi-wing office
- Building-to-building links on a small campus or between a warehouse and an office
- Data center or server-room fiber, planned with rack and closet layout
- A future-proof backbone next to new Cat6A (or Cat 8 in a short server-room link) at the desks and cabinets
Requests sent outside business hours (Monday–Friday, 8:00 AM–5:00 PM Arizona time, closed on holidays) are handled as after-hours work and billed at 1.5x our standard hourly rate; holidays and emergencies are billed at 2x. We respond within 2 to 4 hours after your email is read. For an emergency, email [email protected] with EMERGENCY in the subject line, or call (480) 397-2627.
Not sure if you need fiber?
If the run is short, inside one suite, and has to carry PoE to phones, cameras or Wi-Fi, copper is usually the answer. If the run leaves the building, climbs several floors, or has to last through the next speed upgrade, fiber is usually the answer. We will recommend from a site walk, not a guess.
Fiber vs. copper guide →Fiber optic cabling FAQ
Do you install OM3, OM4 and OS2 fiber?
Yes. We install multimode OM3 and OM4 and single-mode OS2, terminated in rack-mount enclosures, for backbones between closets, floors and buildings.
When do we need fiber instead of copper?
Fiber is the usual choice for longer runs, campus or building-to-building links, and backbones that should stay useful for many years. Copper, including Cat6, Cat6A, Cat7, Cat7A and Cat 8, is still the right tool for desks, phones, cameras and PoE. Our fiber vs. copper guide walks through the decision.
Do you test the fiber when you are done?
Yes. Fiber is terminated, labeled and loss-tested, with reports available at closeout, the same way we test copper permanent links.
Is this residential fiber to the home?
No. C13 is a commercial-only contractor. We install fiber in offices, data centers, warehouses and other business properties.
Related: Structured cabling · MDF / IDF closets · Fiber vs. copper · Cat6 vs. Cat6A vs. Cat8
Serving commercial clients across the Phoenix metro:
