Cloud phones with real local technicians — Phoenix metro only📞 (480) 397-2627
Home › Help & Guides › Norstar feature codes
Legacy phones

Nortel Norstar Feature Codes

A practical cheat sheet of the Feature codes people use most on Norstar and BCM phones.

On Norstar and BCM phones, press the Feature button, then the code in the table. Codes without a star can also be stored on a memory button with Feature *3. To cancel many features, press Feature # and the same code.

Heads up: codes and menus below are common factory defaults and may vary by system. Your administrator (or C13) may have customized them. If something doesn't work as described, call us at (480) 397-2627 or email [email protected].

Common Norstar and BCM feature codes

FeaturePress Feature, thenNotes
Open your mailbox981Default mailbox password is often 0000 until you change it
Leave a message in a mailbox980Then the mailbox number
Operator / open-closed status982Password required
Voicemail administration983Password required; System Coordinator only
Show the voicemail extension985Useful if you want to forward to voicemail
Transfer a caller into a mailbox986Then the mailbox number and #
Interrupt a caller in your mailbox987Picks up a caller who is leaving you a message
Call forward to an extension4Cancel with Feature # 4
Last number redial5
Conference3Press again after the second party answers
Transfer70Or press the Transfer button if your set has one
Call park74The display shows the retrieval code
Group pickup / directed pickup75 / 7676 needs the extension number
Page (all / internal zone / external)60 / 61 / 6263 plus a zone pages that zone and the external speaker
Voice call (page one set)66Then the extension
Do Not Disturb85Cancel with Feature # 85
Night service87Usually only from a control set; cancel with Feature # 87
Line redirection (external)84Must be allowed; cancel with Feature # 84
Check time during a call803
View call log812
Button inquiry*0Identifies an unlabeled button
Program external / internal autodial*1 / *2Then press the memory button
Program a feature onto a button*3Then the Feature code
Ring type / contrast / ring volume*6 / *7 / *80
Speed dial0Then the speed-dial code

A few tips

  • Use a two-line display phone (M7310, M7324 or T7316) for system programming tasks such as time, names and night-service schedules.
  • BCM administration is often done in Element Manager, but the Feature codes on the telephones are largely the same as Norstar.
  • If a code does nothing, it may be disabled on your system, or your set may not have that feature assigned.

Helpful resources

For extra technician-oriented reference material, see Mike's PBX Cookbook and its sister site, PBX Mechanic. Those sites are independent of C13. The how-tos on this page are written in our own words for C13 customers; always confirm the codes on your system before you change programming.

Not sure, or short on time? Call C13 at (480) 397-2627 or email [email protected], and we'll walk you through it or make the change remotely.

Related guides

Related services: Legacy phone support · Phone system migration · Service areas

Need a hand from a local technician?

C13 serves Phoenix-metro businesses only, so when a phone call or remote change won't fix it, a C13 technician can come to your office. Commercial clients only.

Requests sent outside business hours (Monday–Friday, 8:00 AM–5:00 PM Arizona time, closed on holidays) are handled as after-hours work and billed at 1.5x our standard hourly rate; holidays and emergencies are billed at 2x. We respond within 2 to 4 hours after your email is read. For an emergency, email [email protected] with EMERGENCY in the subject line, or call (480) 397-2627.

Last reviewed November 2026. Product names and trademarks belong to their respective owners; C13 is an independent service provider.

Questions we hear a lot

How do I cancel a Norstar feature?

Press Feature, then #, then the same code. For example, Feature # 4 cancels call forward and Feature # 85 cancels Do Not Disturb.

What does Feature *0 do?

Button inquiry. Press Feature *0, then press a button, and the display tells you what that button is programmed to do.

📞 CallInstant QuoteLogin